Optical Interface

  • Transmits and receives the digital video stream of the block cameras with optical fibre
  • SD and HD support
  • Small form factor
  • Excellent image quality
AIVION Optical Selection

 Optical Interfaces for Block Cameras
(Two fiber lines)

TL7070 | optical fiber (Transmitter), two fiber lines
+ Digital LVDS video input from camera+ 1080i, 1080p and 720p output standard support+ 25Hz, 29.97Hz, 30Hz, 50Hz, 59.94Hz and 60Hz frame rates+ Automatic camera and video standard detection+ Optical 3G/HD-SDI output based on SFP compatible transmitter+ Optical transmitter 1310nm/10km/LC for SMF included+ BNC + MCX coax 3G/HD-SDI outputs+ HD-SDI outputs compliant to SMPTE425M/424M/292M/274M/296M+ DVI (HDMI connector) video output+ Native digital signal processing chain for best image quality (no scaling)+ Breakout of camera analog HDTV YPbPr and CVBS video+ Dual serial control interface (RS232 or 3.3V TTL)+ Supply voltage: 7V to 12V DC regulated (5V only when used with FCB-SE600)

Price on request

TL7071 | optical fiber (Receiver),two fiber lines
+ Optical 3G/HD-SDI input based on SFP compatible receiver+ Optical SFP receiver 1260nm-1620nm/10km/LC for SMF included+ Input compliant to SMPTE297M-2006 serial optical 3G/HD video standards + Automatic video standard detection+ Input signal jitter removal+ Format conversion for DVI(HDMI) RGB output+ Reclocked 3G/HD-SDI BNC + MCX coax outputs+ 3G/HD-SDI outputs compliant to SMPTE425M/424M/292M/274M/296M+ SMPTE425M level A, mapping structure 1+ Selectable serial control interface (RS232 or 3.3V TTL)+ Supply voltage: 5V to 12V DC regulated

Price on request

 Optical Interfaces for Block Cameras
(One fiber lines)

TL7075-TL7076 | one fiber line solution for camera control and video, transmit
TL7076+ Optical receiver compliant to SMPTE297M-2006 serial optical 3G/HD video standard + Automatic video standard detection+ Input signal jitter removal+ SFP transceiver λTX=1550nm, SMF/LC included+ Reclocked 3G/HD-SDI BNC + MCX coax outputs, format conversion for DVI(HDMI) RGB output + Dual serial control interface (RS232 or 3.3V TTL)+ Supply voltage: 7V to 12V DC regulatedTL7075+ Supports all Sony FCB-EV, all FCB-EH and FCB-SE600 camera models + Digital LVDS video input from camera+ Optical 3G/HD-SDI output compliant to SMPTE297M-2006+ SFP transceiver λTX=1310nm, SMF/LC included+ Local BNC coax, MCX coax and DVI (HDMI connector) 3G/HD-SDI outputs

Price on request