The TL6035 USB 3.0 interface board from AIVION is a tiny and easy to use HDTV USB3.0 video capture interface for the block cameras. The module receives digital video signals and sends UVC (USB Videl Class) compliant data packets to a connected host computer. Our compact TL6035 module enables the design of small camera systems that need only a single connection between camera and PC. Video stream, control data and power will be connected by a USB 3.0 cable. For camera blocks that need more than 900 mA during startup a Y-cable is required.
USB 3.0 Video Output
- Up to 1080p30 uncompressed HDTV video data, 4:2:2 YUV format
- 1920x1080p @ 25Hz, 29.97Hz, 30 Hz
- 1280x720p @ 50Hz, 59.94Hz, 60Hz, 25Hz, 29.97Hz, 30Hz
- The module receives digital video signals at the input and sends UVC (USB Video Class) compliant data packets containing digital video payload to a connected host computer
Small Form Factor
- Small form factor 45mm x 40mm
- Operates always as Super Speed USB3.0 device (Host or OTG operation modes are not supported)
- Host computer must run a UVC capable operating system
- Parallel up- and downstream of camera control and status data is possible (USB CDC)
- Full USB bus powered camera solution possible depending on camera
- Power supply voltage for camera is generated onboard
- Allows an external power supply
- RoHS compliant (2002/05/EG and 2011/65/EU)
- UL/UR compliant
- Ambient temperature (min/max): -5°C/+60°C = 23°F/140°F
- Operating humidity range 20% to 80%
TL6035 Block Diagram
5V DC from USB3 port
Power consumption (FCB-EV75xx + TL6035) 5.6W
Power consumption (FCB-SE600 + TL6035) 3.5W (cam motors inactive)
Power consumption TL6035: 2.7W/540mA@5V DC (max.)
Operating and Storage Conditions:
Operating Conditions: Ambient temperature (min/max): -5°C/+60°C = 23°F/140°F - Humidity: 20%-80%
Storage Conditions: Temperature (min/max): -20°C/+60°C = -4°F/ 140°F - Humidity: 20%-80%
TL6035 PCB Connectors
J6 USB3 microB connector
J2 LVDS Video In
30wire microcoax connector for 4K Block Cameras. Use 30wire micro coaxial cable supplied with cable kit.
J7 External Power Supply
|1||Input voltage 5V to 7V DC|
|2||Input voltage 5V to 7V DC|
|3||System reset, pull to GND for reset|
J9 RS232 UART Connector
|1 to 7||do not connect|
|9||RXD (host to camera)|
|10||TXD (camera to host)|
TL6035 PCB Outline
Camera supply voltage is generated on TL6035 by a boost converter circuit. This circuit provides 9.55V DC (+/-3%) to the camera.
USB3.0 is specified for 4.5W maximum output power per USB3.0 port on a computer. However, many main boards used in desktop computer systems are able to provide more USB3 output power. In case of notebook and laptop computers, IPCs and SBCs, it has to be checked case by case if USB3 output power is sufficient or not. This is in the sole responsibility of the user of TL6035.
TL6035 EXTERNAL POWER OPTION:
TL6035 allows to use an external power supply in case USB3 power of the used computer is not sufficient. As described on page 3 of this document, external power can be input on J7. Using a voltage of 6V DC is recommended. In case an external power supply is used, this voltage is used on TL6035 for the camera supply boost converter only. All other electronic devices on TL6035 are always powered from USB3 port. No adjustments on TL6035 are required for using external power. When powering up such a configuration, external power must be supplied before or coincident with USB3 power.
Host (PC) - Device Communication
TL6035 operates always as USB device which sends UVC compliant video data to a host PC. The host also communicates with the TL6035 via a serial communication channel (USB UART).
Connecting the TL6035 to the Host PC
Operating System Support
TL6035 can be used with operating systems which fully support USB UVC type data and communication. Currently supported Microsoft Windows operating systems:
- Windows 7 (32 and 64bit)
- Windows 8.1 (32 and 64bit)
- Windows 10 (64bit, version 1511)
Full UVC compliant driver is required. Such drivers are supplied with Microsoft Windows 7 and 8 Video display and recording can be done with standard application programs like VLC player, Mplayer or similar. VLC and Mplayer are open source based applications and can be free downloaded. If users want to design their own applications software, they are free to do so. All software programming tasks are OS based and have to be built upon UVC drivers. For further information please refer to Microsoft Windows API information. TL6035 supports the USB UART functionality. FCB cameras connected to TL6035 can be controlled via a virtual COM port. Any host software which uses COM ports can be used. The USB UART channel is transparent for any protocol. Communication speed is 9600bit/ s or 38400bit/s maximum. Other COM port settings are (8N1).
Video Application on Host PC
Controlling TL6035 from the Host PC via USB UART
Video display and recording can be done with standard application programs like VLC player, Mplayer or similar. VLC and Mplayer are open source based applications and can be free downloaded. If users want to design their own applications software, they are free to do so. All software programming tasks are OS based and have to be built upon UVC drivers. For further information please refer to Microsoft Windows API information.
TL6035 supports the USB UART functionality. FCB cameras connected to TL6035 can be controlled via a virtual COM port. Any host software which uses COM ports can be used. The USB UART channel is transparent for any protocol. Communication speed is 9600bit/ s or 38400bit/s maximum. Other COM port settings are (8N1).
TL6035 | Production Kit
|TL6035||USB 3.0 Vertical Micro B USB Board|
|TLCK-K30-200||30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm|
TL6035-EXT | Evaluation Extension
|EK-PA1100-USB||Power supply and control interface board|
|PS-TE10A05||5 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian.|
|TL-EVK-USB-SA||USB to serial adapter|
|TL-EVK-BRA||Bracket and screws|
|TL-EVK-USB3-A-MICROB||USB 3.0 Cable with a USB 3.0-A male and a USB 3.0 micro-B male connector|
|Control:||RS232, USB UART|
|Kit:||TL6035 Production Kit & Evaluation Extension|
|Mount Option:||Behind camera|
|Block Cameras:||AIVION AZM-FS10L | Full-HD | 10x Optical Zoom | 12x Digital Zoom, AIVION AZM-FS30L | Full-HD | 30x Optical zoom | 12x Digital zoom, AIVION AZM-FS36L | Full-HD | 36x optical Zoom | 12x digital Zoom, Sony FCB EV-7520A | Full-HD | 30x optical Zoom | 12x digital Zoom, Tamron MP1010M-VC | Full-HD | 10x Optical Zoom | 0x Digital Zoom, Tamron MP1110M-VC | Full-HD | 10x Optical Zoom | 16x Digital Zoom|
|Interface Resolution:||FHD 1080p (1920 × 1080 progressive scan), FHD 1080i (1920 × 1080 split into two interlaced fields of 540 lines), HD 720p (1280 × 720 progressive scan)|
|Features:||GPIO, Upright USB Connector|
0 of 0 reviews