NA1012-ET | HDMI to 3G/HD-SDI Converter

Price on request

Request an offer
Product number: NA1012-ET
Manufacturer: AIVION

The NanoConverter NA1012-ET from AIVION is part of a family of small form factor solutions for transmitting and receiving standard based video signals over different physical media such as coaxial cables and optical fibre. Different video formats and interface standards are supported from the transmitter and receiver side including DVI, HDMI, CVBS, YPbPr, RGB, 3G-SDI, HD-SDI and SD-SDI.

Features

One HDMI input

19 pin HDMI Connector. Compliant to HDMI 1.4a and DVI 1.0.
Input format support:

  • RGB 444
  • YCbCr 444
  • YCbCr 422

Two SDI outputs

75 ohm MCX jacks connector. Supporting bit rates due to SMPTE292M and SMPTE424M

  • 1.485 Gbps
  • 1.485/1.001 Gbps
  • 2.97 Gbps
  • 2.97/1.001 Gbps

Full-HD Support

Supported Video formats:

  • 1080p at 50/25/24/59.94/29.97/23.98/60/30
  • 1080i at 50/59.94/60
  • 720p at 50/ 59.94/60

Extendet Temperature Range

-25°C to +70°C (-13°F to 158°F), Humidity 20% to 70%

Small form factor

PCB dimensions 38mm x 38mm

Native video signal processing

No image scaling, no format conversion.

NA1012-ET Block Diagram

AIVION NA1012-ET

J2 HDMI Input Connector

Samtec HDMR-19-02-F-SM-PF

Pin assignment due to HDMI standard

J5 / J6 3G-SDI and HD-SDI Output Connectors

MCX 75Ohm

J1 Power Connector

JST SM03B-SRSS-TB

PinSignal
1Vin DC input, 5V to 18V
2Shutdown/Reset, has pull up resistor of 4,7kOhm to Vin
3GND (0V)

J3 Serial Control Interface

JST SM08B-SRSS-TB

PinSignal
1reserved, do not connect
2reserved, do not connect
3reserved, do not connect
4GND
5RX data (host to device), 3.3V TTL, 4V max.
6TX data (host to device), 3.3V TTL, 4V max.
7GND
8reserved, do not connect

NA1012-ET PCB Outline

AIVION NA1012-ET

Notes NA1012-ET

  1. The Nanoconverter products are RoHS, REACH and UL/UR compliant.
  2. The NA1012 converts video signals received from a DVI or HDMI source for transmission over an 3G/HD- SDI interface which requires clock signals to be in a well defined range. This might not be the case when standard HDMI or DVI output of desktop computers, laptop computers ot other consumer devices are used as signal source.
    The HDMI/DVI TMDS input clock requirements are:
    • 3G mode: 148.5MHz or 148.5 MHz/1.001 +/- 60ppm
    • HD mode: 74.25MHz or 74.25MHz/1.001 +/- 80 ppm

  3. The device detects and measures video input parameter and adjusts all necessary settings accordingly. Manual control is not required. However, the serial control interface can be used for status checking. Any terminal software can be used, whereas parameters have to be set to 38400bps, 8 data bits, no parity and 1 stop bit (8N1). No handshake must be used.
  4. The current device version does not support audio.
  5. The device version does not process HDCP encrypted HDMI input signals.

PartnumberContent
NA1012-ETConverter with straight MCX connectors
TLCK-FL03-1503pin flying leads cable for power, lead length = 15cm / 5.9inch 
NA1012-ET | HDMI to 3G/HD-SDI Converter
Output: 3G-SDI, HD-SDI
Interface Resolution: FHD 1080p (1920 × 1080 progressive scan), FHD 1080i (1920 × 1080 split into two interlaced fields of 540 lines), HD 720p (1280 × 720 progressive scan)
Operating Temperature: -25C ~ +70C
Features: Coax SDI out
Camera Video Output: HDMI
Manufacturer "AIVION"

AIVION is a brand of eVision Systems GmbH Our goal from the beginning was to develop leading camera solutions. Customers who have their core competency in other areas can incorporate our camera technology to add value to their products.

Today, Aivion offers the widest range of interfaces, cameras, converters, software and complete development kits and solutions for all kinds of applications such as automotive, broadcast, defense and aerospace, inspection, medical, ROV, surveillance and video conferencing.

If you are looking for Sony or Tamron block cameras, we have the best choice for your application, or check our own brand of block camera. The best price/performance ratio is one of the mandatory arguments.

Of course, we know that customization is required in some cases. Talk with us if you have a special need and we can discuss solutions. Talk to us if you have a particular need, and we can discuss solutions.

Related links of the manufacturer

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Other Converters

NA1011-ET| 3G/HD-SDI TO HDMI NANOCONVERTER
NA1011-ET| 3G/HD-SDI TO HDMI NANOCONVERTER
The NanoConverter NA1011 from AIVION is part of a family of small form factor solutions for transmitting and receiving standard based video signals over different physical media such as coaxial cables and optical fibre. Different video formats and interface standards are supported from the transmitter and receiver side including DVI, HDMI, CVBS, YPbPr, RGB, 3G-SDI, HD-SDI and SD-SDI. Features One 3G-SDI/HD-SDI Input 75 Ohm MCX jacks connector. Supporting bit rates due to SMPTE292M and SMPTE424M (level A) 1.485 Gbps 1.485/1.001 Gbps 2.97 Gbps 2.97/1.001 Gbps One SDI loop out with reclocking 75Ohm MCX jacks connector. One HDMI output 19 pin HDMI connector. Compliant to HDMI 1.3 No HDCP support Output Data format RGB444, 3x10 bit Extendet Temperature Range -25°C to +70°C (-13°F to 158°F), Humidity 20% to 70% Small form factor PCB dimensions 38mm x 38mm Native video signal processing No image scaling, no format conversion. Download NA1011-ET Datasheet NA1011-ET Block Diagram Operating Range -25°C to +70°C (-13°F to 158°F), Humidity 20% to 70% Vin (DC) min typ max 5V 12V 18V Input Current Requirements At 25°C ambient temperature Vin 3G Operation HD Operation Condition 5V 510mA 450mA Shutdown = Vin or OPEN 12V 220mA 200mA Shutdown = Vin or OPEN 18V 160mA 145mA Shutdown = Vin or OPEN 5-18V < 10mA < 10mA Shutdown = GND NA1011-ET PCB Connectors J3 HDMI Output Connector Samtec HDMR-19-02-F-SM-PF Pin assignment due to HDMI standard J2 (In)/ J7 (Out) 3G-SDI and HD-SDI Connectors MCX 75Ohm The NA1011-ET has straight MCX connectors. Right angled MCX connectors are optional available. J1 Power Connector JST SM03B-SRSS-TB Pin Signal 1 Vin DC input, 5V to 18V 2 Shutdown/Reset, has pull up resistor of 4,7kOhm to Vin 3 GND (0V) J4 Serial Control Interface JST SM08B-SRSS-TB Pin Signal 1 reserved, do not connect 2 reserved, do not connect 3 reserved, do not connect 4 GND 5 RX data (host to device), 3.3V TTL, 4V max. 6 TX data (host to device), 3.3V TTL, 4V max. 7 GND 8 reserved, do not connect NA1011-ET PCB Outline Notes NA1011-ET The Nanoconverter products are RoHS, REACH and UL/UR compliant. The device detects and measures video input parameter and adjusts all necessary settings accordingly. Manual control is not required. However, the serial control interface can be used for status checking. Any terminal software can be used, whereas parameters have to be set to 38400bps, 8 data bits, no parity and 1 stop bit (8N1). No handshake must be used The current device version does not support audio. The device version does not process HDCP encrypted HDMI input signals. NA1011-ET | Production Kit Partnumber Content NA1011-ET Converter with straight MCX connectors TLCK-FL03-150 3pin flying leads cable for power, lead length = 15cm / 5.9inch 
Product number: NA1011-ET

Price on request