TL4K1171 | 6 Gbps UHD-SDI & 3 Gbps Dual Link UHD-SDI Interface

Price on request

Kit
Block Cameras
Request an offer
Product number: TL4K1171-EVK
Manufacturer: AIVION

The TL4K1171 is a small form factor serial digital video (SDI) transmitter from AIVION. Camera video input signals are equalized, processed, and output over coaxial connectors. 6G-SDI output is compliant to SMPTE ST2081-10 MODE 1 mapping, Dual Link 3G-SDI output is compliant to SMPTE ST425-3, 2si mapping and 3G-SDI FHD output is compliant to SMPTE ST425-1 level A standards. Camera control is accomplished by a transparent full duplex communication channel. Physical interface between camera and camera controller / PC is based on RS232 or 3.3V TTL level. TLCK-B cable kit is available as accessory.

Features:

SDI Video Output

  • Native signal processing for highest image quality
  • MCX 75 Ohm straight coaxial connectors
  • Resolution up to 3840x2160p @ 30fps
  • 6G-SDI output of UHD formats
  • Dual Link 3G-SDI output of UHD formats
  • 3G-SDI output of FHD formats
  • Automatic format detection

Small Form Factor

  • Small form factor 60mm x 46mm

Camera Control

  • RS232 level serial camera control interface
  • 3.3V TTL level serial camera control interface

Temperature Range and Power

  • Ambient temperature (min/max): -5°C/+60°C
  • Operating humidity range 20% to 80%
  • Supply voltage 9V to 12V DC

Compliance

  • RoHS compliant (2002/05/EG and 2011/65/EU)
  • UL/UR compliant

Application

  • 4K UHD and full HD integrated cameras based on Sony FCB-ER8550, FCB-ER8530, FCB-ER8300, FCB-ES8230 and FCB-EW9500H camera blocks
  • Industrial, medical, security, law enforcement, video production

TL4K1171 Block Diagram

AIVION TL4K1171

Power Input:

9V to 12V DC (12.5V DC max.) regulated supply input voltage range

Characteristics:

PD = 7.0W typ. (FCB-ER8530 lens steady +TL4K1171)

P TL4K1171 = 3.9W (typ.) (12V DC supply, 3840x2160@29.97fps, TA = 25°C, Humididty = 40%)

Operating and Storage Conditions:

Operating Conditions: Ambient temperature (min/max): -5°C/+60°C = 23°F/140°F - Humidity: 20%-80%

TL4K1171 PCB Connectors

AIVION TL4K1171

J1 Power and Control IF

(JST SM10B-SRSS-TB)

Pin Signal
1 DC Supply voltage input
2 DC Supply voltage input
3 GND (0V)
4 GND (0V)
5 Reset- Pull pin 5 to GND(0V) for 1ms or longer for reset, leave open for normal operation.
6 GND (0V)
7 TXD_TTL (serial IF transmit 3.3V, optional)
8 RXD_TTL (serial IF receive 3.3V, optional)
9 RXD_232 (serial IF receive RS232 level)
10 TXD_232 (serial IF transmit RS232 level)

J3 External Sync

(JST SM08B-SRSS-TB) for use with FCB-ER8550 only

Pin Signal
1 GND (0V)
2 External Sync Loop Out
3 GND (0V)
4 ACC_LED (Output signal from FCB-ER8550)
5 GND (0V)
6 External Sync Input
7 GND (0V)
8 SYNC_LOCK (Output signal from FCB-ER8550)

J4 HDMI Input

(KEL USL00-30L-A)

30wire microcoax connector for FCB-ER8xxx and FCB-EW9500H. Use 30wire micro coaxial cable supplied with cable kit.

J6 Board feature extension connector

Contact us for further notice

J7 + J8 SDI output connector

(Samtec MCX7-J-P-H-ST-TH1)

Mode J7 J8
UHD 6Gbps
UHD mode selection by switch#2
No output 6G-SDI
UHD 3Gbps
UHD mode selection by switch#2
Link1 of Dual Link 3G-SDI Link2 of Dual Link 3G-SDI
FHD
FHD operation requires camera to be set to 1080p60, 1080p59.94 or 1080p50
GND (0V) 3G-SDI (same signal as J7)

Board Config Switch

 

Switch# OFF ON
1 RS232 based camera control 3.3V TTL based camera control
2 6G-SDI UHD Output Mode DL 3G-SDI UHD Output Mode
3 Keep OFF Reserved
4 Keep OFF Reserved

TL4K1171 PCB Outline

AIVION TL4K1171
AIVION TL4K1171 Board Mechanical Top

TL4K1171 | Production Kit

Partnumber Content
TL4K1171 6 Gbps / Dual Link 3Gbps UHD-SDI Interface Board
TLCK-B 1. TLCK-FL10-150
10 pin flying leads cable for power and control(RS232/TTL), length 15cm
2. TLCK-K30-200
30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm, Type 1:n

TL4K1171-EXT | Evaluation Extension

Partnumber Content
EK-PA1100 Power supply and control interface board
PS-TE10A12 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian.
TL-EVK-USB2-A-MICROB USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector
PTL-EVK-BRA Bracket and screws
2 x CK-MCX-BNC MCX to BNC connector cable
TL4K1171 | 6 Gbps UHD-SDI & 3 Gbps Dual Link UHD-SDI Interface
Control: LVTTL, RS232
Kit: TL4K1171 Production Kit & Evaluation Extension
Mount Option: Behind camera
Block Cameras: Sony FCB-ER8300 | 4K | 12x Optical Zoom | 12x Digital Zoom, Sony FCB-ER8530 | 4K | 20x Optical Zoom | 12x Digital Zoom, Sony FCB-ER8550 | 4K | 20x Optical Zoom | 12x Digital Zoom, Sony FCB-ES8230 | 4K | 12x Optical Zoom | 12x Digital Zoom, Sony FCB-EW9500H | 4K | 30x Optical Zoom | 12x Digital Zoom
Interface Resolution: 4K UHD (3840 × 2160 progressive scan)
Interface: Serial Digital Interface
Input: HDMI (LVDS)
Manufacturer "AIVION"
AIVION is a cooperation and a registered trademark of Visual Communication Systems GmbH and eVision Systems GmbH.

Visual Communication has outstanding knowledge in the field of video & broadcast and extensive engineering know-how in System, PCB, FPGA, and DSP design, while eVision Systems brings a strong FPGA and methodology background and decades of sales and marketing expertise into the cooperation.
The mission of the cooperation is to develop and market advanced interfaces, cameras, and video-based components mainly for OEM clients.
Today, Aivion offers the broadest range of interfaces for block cameras and has developed advanced products like the optical fiber, USB 3.0 interfaces and the USB3.0 “Plug and Play” camera. Dozens of customizations for different applications and markets round off the customer driven approach.
To assure best quality all products are manufactured in Germany.
Related links of the manufacturer

0 of 0 reviews

Leave a review!

Share your experiences with other customers.