TL3K7052 | WQHD HDMI

Price on request

Kit
Block Cameras
Request an offer
Product number: TL3K7052-EVK-AIVION-AZM-WQHS36L-LL
Product information "TL3K7052 | WQHD HDMI"

The TL3K7052 is a WQHD HDMI output video transmitter for block cameras from AIVION. It connects to the digital video interface of the block cameras and support several progressive and interlace HDTV formats.

Features:

One HDMI Output

  • 1440p30 /25 Hz
  • 1080p30 /25 Hz
  • 720p30 /25Hz

Small Form Factor

  • Small form factor 46mm x 44mm

Camera Control

  • RS232 level serial camera control interface
  • TTL level serial control interfac

Temperature Range

  • Ambient temperature (min/max): -5°C/+60°C
  • Operating humidity range 20% to 80%
  • Temperature monitoring with alert function

Compliance

  • RoHS compliant (2002/05/EG and 2011/65/EU)
  • UL/UR compliant

Power

  • 9V to 12V DC regulated (13V DC absolute maximum)

TL3K7052 Block Diagram

AIVION TL3K7052

Power Input:

9V to 12V DC regulated (13V DC absolute maximum)

Power consumption (incl. camera) 5.3W (cam motors inactive)

Characteristics:

PD = 5.6W (FCB-EV7520A camera lens steady +TL7055)

PTL7055 = 2.32W (typ.) (12V DC supply, 1920x1080@60fps, TA = 25°C, Humididty = 35%)

Operating and Storage Conditions:

Operating Conditions: Ambient temperature (min/max): -5°C/+60°C = 23°F/140°F - Humidity: 20%-80%

Storage Conditions: Temperature (min/max): -20°C/+60°C = -4°F/140°F - Humidity: 20%-80%

TL3K7052 PCB Connectors

AIVION TL3K7052

J3 LVDS Video In

30wire microcoax connector for camera IF. Use 30wire micro coaxial cable supplied with cable kit.

J8 HDMI Camera Interface

Kycon KDMIX_FS1V_WS or equivalent

J1 Power and RS232/TTL Control IF

JST SM10B-SRSS-TB

Pin Signal
1 DC Supply voltage input
2 DC Supply voltage input
3 GND (0V)
4 GND (0V)
5 Reset / Shut Down, pull to GND to reset/shut down TL7050 and camera for reset, pull to GND for one second or longer
6 GND (0V)
7 TXD_TTL (serial IF transmit, 3.3V) and/or temperature alert output
8 RXD_TTL (serial IF receive, 3.3V)
9 RXD_232 (serial IF receive, RS232 level)
10 TXD_232 (serial IF transmit, RS232 level)

TL3K7052 PCB Outline

AIVION TL3K7052

Test Pattern Generator

TL3K7052 has an integrated test pattern generator (TPG) which can be operated independent of any camera. The TPG can be enabled by setting onboard switch number 4 to ON position and repowering the TL3K7052 board. In addition one out of two test pattern and one out of four video standards can be selected by setting onboard switches 1, 2 and 3 accordingly. The following tables summarize all details.

To enable TPG mode, please execute these steps:

  • 1. Set video mode with switches 2 and 3
  • 2. Set pattern with switch 1
  • 3. Set switch 4 to ON to enable TPG mode
  • 4. Switch TL3K7052 power off and on again

Note: For TPG operation on TL3K7052, the camera must be connected.

TL3K7052 | Production Kit

Partnumber Content
TL3K7052 WQHD HDMI Board
TLCK-B 1. TLCK-FL10-150
10 pin flying leads cable for power and control(RS232/TTL), length 15cm
2. TLCK-K30-200
30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm

TL3K7052-EXT | Evaluation Extension

Partnumber Content
EK-PA1100 Power supply and control interface board
PS-TE10A12 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian.
TL-EVK-USB2-A-MICROB USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector
TL-EVK-BRA Bracket and screws
TL-EVK-HDMI High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter
Control: LVTTL, RS232
Input: LVDS
Interface: HDMI
Kit: Production Kit (Board incl. Cable), TL3K7052 Production Kit & Evaluation Extension
Block Cameras: AZM-WQHS36L-LL |WQ-HD | 36x Optical Zoom | 32x Digital Zoom
Interface Resolution: FHD 1080p (1920 × 1080 progressive scan), HD 720p (1280 × 720 progressive scan), WQHD (2560 x 1440 progessive scan)

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Optional Products

EK-PA1100 | Power supply and control interface board
Power supply and control interface board

Price on request

PS-TE10A12 | 12 V AC to DC external power supply
12 V AC to DC external power supply

Price on request

TL-EVK-BRA | Camera bracket
Camera bracket

Price on request

TL-EVK-HDMI | HDMI-A Cable
High Speed HDMI-A Cable, with two HDMI-A 19 pin male connectors

Price on request

TL-EVK-USB2-A-MICROB |  USB 2.0 Cable A- male and micor-B male
USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector | 1,5m

Price on request

TLCK-B | Base Cable Kit
Base Cable KitParts:TLCK-FL10-150 | 10 pin flying leads cable for power and control(RS232/TTL), length 15cmTLCK-K30-200   | 30 pin KEL USL type micro coaxial cable, the connector on both sides, length 20cm

Price on request

TLCK-FL10-150 | 10pin flying leads cable
10pin flying leads cable for power and control

Price on request

TLCK-K30-200 | 30pin KEL USL type micro coaxial cable 20cm
30pin KEL USL type micro coaxial cable 20cm

Price on request