Sony FCB-EW9500H

Price on request

AIVION Extension Kit
AIVION Interface
Request an offer
Product number: TL4K1152-PK-Sony-FCB-EW9500
Product information "Sony FCB-EW9500H"

HDMI Interface FCB-EW9500 series

The TL4K1152 is a small form factor HDMI interface. The camera control can be managed through an RS232 port.

Supported Video format:

  • 4K mode 2160p 30/25
  • Full HD Mode 1080p 60/59.94/50/30/29.97/25
TL4K1152

SDI Interface FCB-EW9500 series

The TL4K1161 is a small form factor serial digital video (SDI) transmitter from AIVION. Camera video input signals are equalized, processed, and output over straight DIN7A(10.23) connectors. Dual Link 3G-SDI output compliant to SMPTE ST425-3, 2si mapping, FHD output compliant o SMPTE ST425-1 level A Camera control is accomplished by a transparent full-duplex communication channel.

Supported Video format:

  • 4K mode 2160p 30/25
  • Full HD Mode 1080p 60/59.94/50/30/29.97/25
TL4K1161

High Resolution

Utilizing a 4M sensor and sharp lens achieve superior resolution and accurate image representation with the evolved AF/AE/ AWB functions even in low light environments. Combined with enhanced optical zoom achieve a high image quality from the Wide end to the Tele end. 

High Sensitivity

Through introduction of new cell structures and circuit technology, the series efficiently uses light, achieving twice the sensitivity compared to conventional image sensors. Consequently, clear images can be captured even during the night and in dark environments.

Super Image Stabilizer

Enables capturing of highly precise video with reduced blurring even in harsh environments with strong vibrations by greatly improving blur suppression and image stabilizer. The camera is during full HD or HD output equipped with the Super and Super modes. Applying a wide correction area using 4M pixels the camera series suppresses blurs from strong vibrations and rotational vibrations compared to conventional models.

Super

Suppresses strong vibrations with a wider correction area compared to conventional electronic vibration suppressors.

Super +

By employing a wider correction area than “Super,” “Super+” suppresses intense vibrations that cannot be suppressed with “Super.” Potential application: Shipboard, attachments for ITS surveillance, on bridges, drones, vehicles, etc.

Starvis 1/1.8-type CMOS sensor

The Sony FCB-9500H Sony blockcamera is equipped with an approximately 417 million- effective-pixel, 1/1.8-type high sensitive, AR-coated (anti-reflective coating) CMOS sensor. With a high spectral sensitivity value in near infrared to infrared, it is especially effective for security uses. Furthermore, the AR coating minimizes the ghost phenomenon and enables capturing of images without missing crucial information even during the night and in dark environments.

30x Enhanced Optical Zoom

Using a compact lens designed for resolutions up to 8M the camera maximizes the coverage of the 4M sensor. The newly designed lens provides high resolution and low aberration, making it capable of capturing high resolution images that span from the Tele end from the screen center to the surrounding edges. There is no image deterioration using the 30x enhanced optical zoom. Experience full sharpness and dramatically reduced chromatic aberration in full HD output and also achieve images with sharp resolution during 4M output.

Flare reduction with the new iris

Diamond flares and ghosts that occur on lenses disrupts focusing and deteriorates the image quality. The new lens adopts 7 blades compared to the conventional 2 blades, improving this phenomenon by generating fine circular flares, and thus greatly improving image quality.

Color image acquisition during ICR ON

On conventional models, only black and white images are achieved while the IR cut filter was removed. The new ICR ON COLOR function enables the camera to capture shots with color even when the IR cut filter is removed. It is effective for color visibility in dark environments. The precision of color reproduction varies depending on the light source and brightness.

Comparison image acquisition during ICR on

Spot Focus · Spot AE · Spot AWB

Enables functioning of AF, AE, and AWB only in specified areas within the screen. Enables independent specification of any rectangle of the entire screen divided in 6 x 8. For example, if the subject location is specified with Spot AE, enables capturing of images with Exposure effects reduced even if brightness changes occur outside the specified frame.

FCB-EW9500H Adjustable ROIs
Adjustable ROIs
Sony FCB-EW9500H Screen divided in 6 x 8
Screen divided in 6 x 8

Wide Dynamic Range (Wide-D)

Wide-D mode is a function for dividing an image into several blocks for correcting blocked-up shadows and blown-out highlights in accordance with the intensity difference. It enables image acquisition in which portions ranging from dark to light can be recognized, even when capturing a subject with a large intensity difference that is backlit or includes extremely light regions of interest.

Sony FCB-EW9500H Wide Dynamic Range Off
Wide Dynamic Range Off
Sony FCB-EW9500H Wide Dynamic Range Off
Wide Dynamic Range On

Sony FCB-EW9500H Specifications

Specification FCB-EW9500H (4M · HDMI)
Basic Features Image Sensor
(Number of effective pixels)
1/1.8-type STARVISTM CMOS Sensor (Approx. 4.17M pixels)
   Output Image Size (H x V) 2688x1512 *1
2560x1440*1 1920x1080, 1280x720
  Signal System 2160p/60, 2160p/59.94, 2160p/50, 2160p/30, 2160p/29.97, 2160p/25, 1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/29.97, 1080p/25, 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25
  Minimum Illumination
(50%, High Sensitivity Mode ON)
ICR-Off mode: 0.009 lx (Shutter Speed: 1/30 s), 0.0012 lx (Shutter Speed: 1/4 s or 1/3 s)
ICR-On mode: 0.00008 lx (Shutter Speed: 1/30 s), 0.000005 lx (Shutter Speed: 1/4 s or 1/3 s, 30%)
  Minimum Illumination
(50%, High Sensitivity Mode OFF)
ICR-Off mode: 0.09 lx (Shutter Speed: 1/30 s), 0.012 lx (Shutter Speed: 1/4 s or 1/3 s) ICR-On mode: 0.00063 lx (Shutter Speed: 1/30 s)
  Recommended Illumination 100 lx to 100,000 lx
  Image S/N  Wide end to Tele end - 4.8 s (Focus Tracking ON), 2.9 s (Focus Tracking OFF)
Wide end to Digital 12x tele - 6.1 s (29.97p/59.94p), 6.4 s(25p/50p)
  
  Gain Auto/Manual (0 dB to 50.0 dB), 0 to 28 steps
  Shutter Speed 1/1 to 1/10000 s, 22 steps
  Sync System Internal
  Exposure Control 0 dB to ± 10.5 dB, 15 steps
  Backlight Compensation Yes
  Gamma Standard / Straight gamma
  Aperture Control 16 steps
  White Balance Auto, ATW, Indoor, Outdoor, One Push WB, Manual WB, Outdoor Auto, Sodium Vapor Lamp (Fix/Auto/Outdoor Auto), Spot AWB
  AE (Auto Exposure Mode) Full Auto, Manual, Priority mode (shutter/iris), EV compensation, Spot AE, Slow AE
  Zoom 30x Enhanced Optical Zoom 36x StableZoom and 12x Digital Zoom
 - StableZoom increases the magnification by combining optical zoom and digital zoom
 - FCB-EW9500H: For 1080p, 1080i, and 720p only.
  Lens (wide to tele) f = 6.5 mm to 162.5 mm, F1.6 to 4.8
  Zoom Mode Standard Mode / Variable Mode / Direct Mode
  Zoom Movement Speed Wide end to Tele end - 4.8 s (Focus Tracking ON), 2.9 s (Focus Tracking OFF)
Wide end to Digital 12x tele - 6.1 s (29.97p/59.94p), 6.4 s(25p/50p)
Digital wide to Digital 12x tele - 1.4 s (29.97p/59.94p), 1.6 s (25p/50p)
  Focusing System Auto Focus (Normal AF, Interval AF, Zoom Trigger AF [Sensitivity: normal, low]), Manual (Standard, Variable, Direct), One Push Trigger, Full Scan One Push Trigger, Near Limit, ICR-on Correction, Spot Focus
  Focus Movement Time ∞ to Near: 1.4 s
  Horizontal Viewing Angle 58.1° to 2.3°
  Minimum Object Distance (wide end to tele end) 100 mm to 1200mm
Camera Features Auto ICR Yes
  Wide Dynamic Range (Wide-D) Yes
  Visibility Enhancer Yes
  Defog Yes (low/mid/high)
  Noise Reduction Yes (3D + 2D / Independent setting (3D, 2D))
  Progressive Scan Mode Yes
  Image Stabilization Yes: Super image stabilizer (Super / Super+ FCB-EW9500H: For 1080p, 1080i, and 720p only.)
  Spot Light Avoidance Yes
  Motion Detection Yes
  Privacy Zone Masking Yes
  Alarm Yes
  Slow AE Response Yes
  Picture Effects Black White (Monochrome Image)
  Picture Freeze Yes
  Electronic-Flip (E-FLIP) Yes
  Mirror Image Yes
  Slow Shutter Yes
  Temperature Readout Yes
  Title Display Yes (20 characters / line, max. 11lines)
  Camera Mode Display Yes (English)
Interface Video Output Digital : Y/Pb/Pr 4:2:2 (HDMI) Y:8bit, C:8bit RGB 4:4:4 (HDMI) R:8bit G:8bit B:8bit
  Camera Control Interface VISCA protocol (CMOS 3.3V Level, 5.5V tolerance); Baud Rate : 9.6 kbps, 19.2 kbps, 38.4 kbps, 115.2 kbps, Stop bit: 1 bit
General Power Requirements 7.0 V to 12.0 V DC
  Power Consumption 4.6 W (When motor operates: 6.3W)
  Operating Temperature "-5 °C to +60 °C (23 °F to +140 °F)"
  Storage Temperature "-20 °C to +60 °C (–4 °F to +140 °F)"
  Operating Humidity 20% to 80% (Absolute humidity: 36 g/m3)
  Storage Humidity 20% to 95% (Absolute humidity: 36 g/m3)
  Dimensions (W x H x D) 56.0 x 64.0 x 125 mm (2 1/4 × 2 5/8 × 5 in.)
  Mass Approx. 439 g (15 oz.)

FCB-9500 Series Promotion Block Camera Movie

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Sony FCB-EW9500H Interfaces

TL4K1152 | 4K HDMI
Kit: Production Kit (Board incl. Cable) | Block Cameras: No Block Camera
The TL4K1152 is a small form factor digital serial video transmitter from AIVION. Small form factor with an attractive price are some of the main features of the TL4K1152. It supports the new trend setting Sony block camera FCB 4K Series from Sony via an HDMI output. Camera control can be managed through an RS232 port. Via the available USB2 interface firmware updates can be obtained. Features: One HDMI 1.4b video output Up to 2160p30 UHD, FHD, HD video format support Integrated input signal equalizer Ultra high speed 3.4Gbps cable driver Small Form Factor Small form factor 46mm x 30mm Camera Control RS232 level serial camera control interface 3.3V TTL level serial camera control IF Temperature Range Ambient temperature (min/max): -5°C/+60°C Operating humidity range 20% to 80% Compliance RoHS compliant (2002/05/EG and 2011/65/EU) Power Supply voltage 7V to 12V DC regulated Ultra low power - 150mW@8V supply voltage only Download TL4K1152 V2.0.0 Datasheet TL4K1152 Block Diagram Power Input: 7V to 12V DC regulated supply input voltage range Characteristics: PD = 3.05W (FCB-ER8300 lens steady +TL4K1152) PTL4K1152 = 150mW (typ.) (8V DC supply, 3840x2160@29.97fps, TA = 25°C, Humididty = 40%) Operating and Storage Conditions: Operating Conditions: Ambient temperature (min/max): -5°C/+60°C = 23°F/140°F - Humidity: 20%-80% TL4K1152 PCB Connectors J4 LVDS Video In 30wire microcoax connector for camera IF. Use 30wire micro coaxial cable supplied with cable kit. J2 HDMI Camera Interface J1 Power and RS232/TTL Control IF Pin Signal 1 DC Supply voltage input 2 DC Supply voltage input 3 GND (0V) 4 GND (0V) 5 Reset- Pull pin 5 to GND(0V) for 1ms or longer for reset, leave open for normal operation. 6 GND (0V) 7 TXD_TTL (serial IF transmit 3.3V) 8 RXD_TTL (serial IF receive 3.3V) 9 RXD_232 (serial IF receive RS232) 10 TXD_232 (serial IF transmit RS232) J3 USB connector do not connect (for FCB-ER8300 firmware updates only). USB connector is no more assembled for revision B boards. TL4K1152 PCB Outline TL4K1152 | Production Kit Partnumber Content TL4K1152 HDMI Board TLCK-B 1. TLCK-FL10-150 10 pin flying leads cable for power and control(RS232/TTL), length 15cm 2. TLCK-K30-200 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm TL4K1152-EXT | Evaluation Extension Partnumber Content EK-PA1100 Power supply and control interface board PS-TE10A12 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. TL-EVK-USB2-A-MICROB USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector TL-EVK-BRA Bracket and screws TL-EVK-HDMI High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter

Price on request

TL4K1161 | Dual Link 3 Gbps UHD-SDI
Kit: Production Kit (Board incl. Cable) | Block Cameras: No Block Camera
The TL4K1161 is a small form factor serial digital video (SDI) transmitter from AIVION. Camera video input signals are equalized, processed, and output over straight DIN7A(10.23) connectors. Dual Link 3G-SDI output compliant to SMPTE ST425-3, 2si mapping, FHD output compliant o SMPTE ST425-1 level A Camera control is accomplished by a transparent full-duplex communication channel. The physical interface between camera and camera controller / PC is based on RS232 or 3.3V TTL level. TLCK-B cable kit is included and contains a 30wire micro coaxial cable for connecting TL4K1161 to FCB-ER8300 as well as a 10wire power supply and serial control cable harness. Features: SDI Video Output DIN7A (10.23) 75 Ohm straight coaxial connectors Resolution up to 3840x2160p @ 30fps Dual Link 3 Gbps UHD-SDI Transmitter Dual Out 3/1.5 Gbps FHD-SDI Transmitter 3G-SDI output of FHD formats 1.5G-SDI output of HD formats Automatic format detection Small Form Factor Small form factor 60mm x 46mm Camera Control RS232 level serial camera control interface 3.3V TTL level serial camera control IF Temperature Range and Power Ambient temperature (min/max): -5°C/+60°C Operating humidity range 20% to 80% Supply voltage 9V to 12V DC regulated Compliance RoHS compliant (2002/05/EG and 2011/65/EU) UL/UR compliant Application 4K UHD and full HD integrated cameras based on Sony FCB-ER8550, FCB-ER8530 and FCB-ER8300 4K camera blocks Industrial, medical, security, law enforcement, video production Download TL4K1161 V1.1.0 Datasheet TL4K1161 Block Diagram Power Input: 9V to 12V DC regulated supply input voltage range Characteristics: PD = 6.72W typ. (FCB-ER8300 lens steady +TL4K1161) P TL4K1161 = 3.62W (typ.) (12V DC supply, 3840x2160@29.97fps, TA = 25°C, Humidity = 40%) Operating and Storage Conditions: Operating Conditions: Ambient temperature (min/max): -5°C/+60°C = 23°F/140°F - Humidity: 20%-80% TL4K1161 PCB Connectors J7 SDI output connector Link 1 of DL-3G SDI output or 3G/1.5G-SDI FHD/HD output J8 SDI output connector Link 2 of DL-3G SDI output or 3G/1.5G-SDI FHD/HD output J1 Power and Control IF Pin Signal 1 DC Supply voltage input 2 DC Supply voltage input 3 GND (0V) 4 GND (0V) 5 Reset- Pull pin 5 to GND(0V) for 1ms or longer for reset, leave open for normal operation. 6 GND (0V) 7 TXD_TTL (serial IF transmit 3.3V, optional) 8 RXD_TTL (serial IF receive 3.3V, optional) 9 RXD_232 (serial IF receive RS232 level) 10 TXD_232 (serial IF transmit RS232 level) J4 LVDS Video In 30wire microcoax connector for 4K Block Cameras. Use 30wire micro coaxial cable supplied with cable kit. TL4K1161 PCB Outline TL4K1161 | Production Kit Partnumber Content TL4K1161 Dual Link 3G-SDI Board TLCK-B 1. TLCK-FL10-150 10 pin flying leads cable for power and control(RS232/TTL), length 15cm 2. TLCK-K30-200 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm TL4K1161-EXT | Evaluation Extension Partnumber Content EK-PA1100 Power supply and control interface board PS-TE10A12 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. TL-EVK-USB2-A-MICROB USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector TL-EVK-BRA Bracket and screws 2 x TL-EVK-DIN-BNC-1 2 Connector cables with a 75Ω BNC Straight Plug and a 75Ω DIN Straight Plug. Certified for 3Gbps. Length 1 meter 

Price on request