Sony FCB-EW9500H

Price on request

AIVION Extension Kit
AIVION Interface
Request an offer
Product number: TL4K1161-PK-Sony-FCB-EW9500H-1
Manufacturer: Sony

HDMI Interface FCB-EW9500 series

The TL4K1152 is a small form factor HDMI interface. The camera control can be managed through an RS232 port.

Supported Video format:

  • 4K mode 2160p 30/25
  • Full HD Mode 1080p 60/59.94/50/30/29.97/25
TL4K1152

Dual Link 3 Gbps UHD-SDI Interface FCB-EW9500 series

The TL4K1161 is a small form factor serial digital video (SDI) transmitter from AIVION. Camera video input signals are equalized, processed, and output over straight DIN7A(10.23) connectors. Dual Link 3G-SDI output compliant to SMPTE ST425-3, 2si mapping, FHD output compliant o SMPTE ST425-1 level A Camera control is accomplished by a transparent full-duplex communication channel.

Supported Video format:

  • 4K mode 2160p 30/25
  • Full HD Mode 1080p 60/59.94/50/30/29.97/25
TL4K1161

Dual Link 3 Gbps UHD-SDI Interface with PCOC Feature
FCB-EW9500 series

The TL4K1161 is a small form factor serial digital video (SDI) transmitter from AIVION. Camera video input signals are equalized, processed, and output over straight DIN7A(10.23) connectors. Dual Link 3G-SDI output compliant to SMPTE ST425-3, 2si mapping, FHD output compliant o SMPTE ST425-1 level A Camera control is accomplished by a transparent full-duplex communication channel.

  • 4K mode 2160p 30/25
  • Full HD Mode 1080p 60/59.94/50/30/29.97/25
TL4K1261

6 Gbps UHD-SDI Interface
FCB-EW9500 series

TL4K1171 is a small form factor serial digital video (SDI) transmitter. Camera video input signals are equalized, processed and output over coaxial connectors. 6G-SDI output is compliant to SMPTE ST2081-10 MODE 1 mapping, Dual Link 3G-SDI output is compliant to SMPTE ST425-3, 2si mapping and 3G-SDI FHD output is compliant to SMPTE ST425-1 level A standards.

Supported Video format:

  • UHD (4MP active) output 2160/p30, 2160p29.97, 2160p25
  • FHD output 1080p60, 1080p59.94, 1080p50
TL4K1171

High Resolution

Utilizing a 4M sensor and sharp lens achieve superior resolution and accurate image representation with the evolved AF/AE/ AWB functions even in low light environments. Combined with enhanced optical zoom achieve a high image quality from the Wide end to the Tele end. 

High Sensitivity

Through introduction of new cell structures and circuit technology, the series efficiently uses light, achieving twice the sensitivity compared to conventional image sensors. Consequently, clear images can be captured even during the night and in dark environments.

Super Image Stabilizer

Enables capturing of highly precise video with reduced blurring even in harsh environments with strong vibrations by greatly improving blur suppression and image stabilizer. The camera is during full HD or HD output equipped with the Super and Super modes. Applying a wide correction area using 4M pixels the camera series suppresses blurs from strong vibrations and rotational vibrations compared to conventional models.

Super

Suppresses strong vibrations with a wider correction area compared to conventional electronic vibration suppressors.

Super +

By employing a wider correction area than “Super,” “Super+” suppresses intense vibrations that cannot be suppressed with “Super.” Potential application: Shipboard, attachments for ITS surveillance, on bridges, drones, vehicles, etc.

Starvis 1/1.8-type CMOS sensor

The Sony FCB-9500H Sony blockcamera is equipped with an approximately 417 million- effective-pixel, 1/1.8-type high sensitive, AR-coated (anti-reflective coating) CMOS sensor. With a high spectral sensitivity value in near infrared to infrared, it is especially effective for security uses. Furthermore, the AR coating minimizes the ghost phenomenon and enables capturing of images without missing crucial information even during the night and in dark environments.

30x Enhanced Optical Zoom

Using a compact lens designed for resolutions up to 8M the camera maximizes the coverage of the 4M sensor. The newly designed lens provides high resolution and low aberration, making it capable of capturing high resolution images that span from the Tele end from the screen center to the surrounding edges. There is no image deterioration using the 30x enhanced optical zoom. Experience full sharpness and dramatically reduced chromatic aberration in full HD output and also achieve images with sharp resolution during 4M output.

Flare reduction with the new iris

Diamond flares and ghosts that occur on lenses disrupts focusing and deteriorates the image quality. The new lens adopts 7 blades compared to the conventional 2 blades, improving this phenomenon by generating fine circular flares, and thus greatly improving image quality.

Color image acquisition during ICR ON

On conventional models, only black and white images are achieved while the IR cut filter was removed. The new ICR ON COLOR function enables the camera to capture shots with color even when the IR cut filter is removed. It is effective for color visibility in dark environments. The precision of color reproduction varies depending on the light source and brightness.

Comparison image acquisition during ICR on

Spot Focus · Spot AE · Spot AWB

Enables functioning of AF, AE, and AWB only in specified areas within the screen. Enables independent specification of any rectangle of the entire screen divided in 6 x 8. For example, if the subject location is specified with Spot AE, enables capturing of images with Exposure effects reduced even if brightness changes occur outside the specified frame.

FCB-EW9500H Adjustable ROIs
Adjustable ROIs
Sony FCB-EW9500H Screen divided in 6 x 8
Screen divided in 6 x 8

Wide Dynamic Range (Wide-D)

Wide-D mode is a function for dividing an image into several blocks for correcting blocked-up shadows and blown-out highlights in accordance with the intensity difference. It enables image acquisition in which portions ranging from dark to light can be recognized, even when capturing a subject with a large intensity difference that is backlit or includes extremely light regions of interest.

Sony FCB-EW9500H Wide Dynamic Range Off
Wide Dynamic Range Off
Sony FCB-EW9500H Wide Dynamic Range Off
Wide Dynamic Range On

Sony FCB-EW9500H Specifications

SpecificationFCB-EW9500H (4M · HDMI)
Basic FeaturesImage Sensor
(Number of effective pixels)
1/1.8-type STARVISTM CMOS Sensor (Approx. 4.17M pixels)
  Output Image Size (H x V)2688x1512 *1
2560x1440*1 1920x1080, 1280x720
 Signal System2160p/60, 2160p/59.94, 2160p/50, 2160p/30, 2160p/29.97, 2160p/25, 1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/29.97, 1080p/25, 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25
 Minimum Illumination
(50%, High Sensitivity Mode ON)
ICR-Off mode: 0.009 lx (Shutter Speed: 1/30 s), 0.0012 lx (Shutter Speed: 1/4 s or 1/3 s)
ICR-On mode: 0.00008 lx (Shutter Speed: 1/30 s), 0.000005 lx (Shutter Speed: 1/4 s or 1/3 s, 30%)
 Minimum Illumination
(50%, High Sensitivity Mode OFF)
ICR-Off mode: 0.09 lx (Shutter Speed: 1/30 s), 0.012 lx (Shutter Speed: 1/4 s or 1/3 s) ICR-On mode: 0.00063 lx (Shutter Speed: 1/30 s)
 Recommended Illumination100 lx to 100,000 lx
 Image S/N Wide end to Tele end - 4.8 s (Focus Tracking ON), 2.9 s (Focus Tracking OFF)
Wide end to Digital 12x tele - 6.1 s (29.97p/59.94p), 6.4 s(25p/50p)
  
 GainAuto/Manual (0 dB to 50.0 dB), 0 to 28 steps
 Shutter Speed1/1 to 1/10000 s, 22 steps
 Sync SystemInternal
 Exposure Control0 dB to ± 10.5 dB, 15 steps
 Backlight CompensationYes
 GammaStandard / Straight gamma
 Aperture Control16 steps
 White BalanceAuto, ATW, Indoor, Outdoor, One Push WB, Manual WB, Outdoor Auto, Sodium Vapor Lamp (Fix/Auto/Outdoor Auto), Spot AWB
 AE (Auto Exposure Mode)Full Auto, Manual, Priority mode (shutter/iris), EV compensation, Spot AE, Slow AE
 Zoom30x Enhanced Optical Zoom 36x StableZoom and 12x Digital Zoom
 - StableZoom increases the magnification by combining optical zoom and digital zoom
 - FCB-EW9500H: For 1080p, 1080i, and 720p only.
 Lens (wide to tele)f = 6.5 mm to 162.5 mm, F1.6 to 4.8
 Zoom ModeStandard Mode / Variable Mode / Direct Mode
 Zoom Movement SpeedWide end to Tele end - 4.8 s (Focus Tracking ON), 2.9 s (Focus Tracking OFF)
Wide end to Digital 12x tele - 6.1 s (29.97p/59.94p), 6.4 s(25p/50p)
Digital wide to Digital 12x tele - 1.4 s (29.97p/59.94p), 1.6 s (25p/50p)
 Focusing SystemAuto Focus (Normal AF, Interval AF, Zoom Trigger AF [Sensitivity: normal, low]), Manual (Standard, Variable, Direct), One Push Trigger, Full Scan One Push Trigger, Near Limit, ICR-on Correction, Spot Focus
 Focus Movement Time∞ to Near: 1.4 s
 Horizontal Viewing Angle58.1° to 2.3°
 Minimum Object Distance (wide end to tele end)100 mm to 1200mm
Camera FeaturesAuto ICRYes
 Wide Dynamic Range (Wide-D)Yes
 Visibility EnhancerYes
 DefogYes (low/mid/high)
 Noise ReductionYes (3D + 2D / Independent setting (3D, 2D))
 Progressive Scan ModeYes
 Image StabilizationYes: Super image stabilizer (Super / Super+ FCB-EW9500H: For 1080p, 1080i, and 720p only.)
 Spot Light AvoidanceYes
 Motion DetectionYes
 Privacy Zone MaskingYes
 AlarmYes
 Slow AE ResponseYes
 Picture EffectsBlack White (Monochrome Image)
 Picture FreezeYes
 Electronic-Flip (E-FLIP)Yes
 Mirror ImageYes
 Slow ShutterYes
 Temperature ReadoutYes
 Title DisplayYes (20 characters / line, max. 11lines)
 Camera Mode DisplayYes (English)
InterfaceVideo OutputDigital : Y/Pb/Pr 4:2:2 (HDMI) Y:8bit, C:8bit RGB 4:4:4 (HDMI) R:8bit G:8bit B:8bit
 Camera Control InterfaceVISCA protocol (CMOS 3.3V Level, 5.5V tolerance); Baud Rate : 9.6 kbps, 19.2 kbps, 38.4 kbps, 115.2 kbps, Stop bit: 1 bit
GeneralPower Requirements7.0 V to 12.0 V DC
 Power Consumption4.6 W (When motor operates: 6.3W)
 Operating Temperature"-5 °C to +60 °C (23 °F to +140 °F)"
 Storage Temperature"-20 °C to +60 °C (–4 °F to +140 °F)"
 Operating Humidity20% to 80% (Absolute humidity: 36 g/m3)
 Storage Humidity20% to 95% (Absolute humidity: 36 g/m3)
 Dimensions (W x H x D)56.0 x 64.0 x 125 mm (2 1/4 × 2 5/8 × 5 in.)
 MassApprox. 439 g (15 oz.)

FCB-9500 Series Promotion Block Camera Movie

Sony FCB-EW9500H
Basic | Category: Block Cameras
Basic | Possible Frame Rate: 2160p @ 60fps, 2160p @ 59.94fps, 2160p @ 50fps, 2160p @ 30fps, 2160p @ 29.97fps, 2160p @ 25fps, 1080p @ 60fps, 1080p @ 59.94fps, 1080p @ 30fps, 1080p @ 29.97fps, 1080p @ 25fps, 1080i @ 60fps, 1080i @ 59.94fps, 1080i @ 50fps, 720p @ 60fps, 720p @ 59.94fps, 720p @ 50fps, 720p @ 30fps, 720p @ 29.97fps, 720p @ 25fps
Imaging | Pixel: 4 Megapixel
Imaging | Optical Zoom: 30x
Imaging | Digital Zoom: 12x
Camera: HD Block Camera, WQHD Block Camera
Interface: HDMI, Serial Digital Interface
Input: HDMI (LVDS)
Manufacturer "Sony"
Sony Full-HD / 4K blocks are colour zoom cameras for video streaming in OEM applications. They have advanced features including VISCA command protocol,  Advanced Noise Reduction, Auto ICR, Spherical Privacy Zone Masking and Wide Dynamic Range to get the most out of Sony's cutting-edge sensors.
Related links of the manufacturer

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Sony FCB-EW9500H Interfaces

TL4K1152 | 4K HDMI
TL4K1152 | 4K HDMI
Kit: Production Kit (Board incl. Cable) | Block Cameras: No Block Camera
The TL4K1152 is a small form factor digital serial video transmitter from AIVION. Small form factor with an attractive price are some of the main features of the TL4K1152. It supports the new trend setting Sony block camera FCB 4K Series from Sony via an HDMI output. Camera control can be managed through an RS232 port. Via the available USB2 interface firmware updates can be obtained. Features: One HDMI 1.4b video output Up to 2160p30 UHD, FHD, HD video format support Integrated input signal equalizer Ultra high speed 3.4Gbps cable driver Small Form Factor Small form factor 46mm x 30mm Camera Control RS232 level serial camera control interface 3.3V TTL level serial camera control IF Temperature Range Ambient temperature (min/max): -5°C/+60°C Operating humidity range 20% to 80% Compliance RoHS compliant (2002/05/EG and 2011/65/EU) Power Supply voltage 7V to 12V DC regulated Ultra low power - 150mW@8V supply voltage only Download TL4K1152 V2.0.0 Datasheet TL4K1152 Block Diagram Power Input: 7V to 12V DC regulated supply input voltage range Characteristics: PD = 3.05W (FCB-ER8300 lens steady +TL4K1152) PTL4K1152 = 150mW (typ.) (8V DC supply, 3840x2160@29.97fps, TA = 25°C, Humididty = 40%) Operating and Storage Conditions: Operating Conditions: Ambient temperature (min/max): -5°C/+60°C = 23°F/140°F - Humidity: 20%-80% TL4K1152 PCB Connectors J4 LVDS Video In 30wire microcoax connector for camera IF. Use 30wire micro coaxial cable supplied with cable kit. J2 HDMI Camera Interface J1 Power and RS232/TTL Control IF Pin Signal 1 DC Supply voltage input 2 DC Supply voltage input 3 GND (0V) 4 GND (0V) 5 Reset- Pull pin 5 to GND(0V) for 1ms or longer for reset, leave open for normal operation. 6 GND (0V) 7 TXD_TTL (serial IF transmit 3.3V) 8 RXD_TTL (serial IF receive 3.3V) 9 RXD_232 (serial IF receive RS232) 10 TXD_232 (serial IF transmit RS232) J3 USB connector do not connect (for FCB-ER8300 firmware updates only). USB connector is no more assembled for revision B boards. TL4K1152 PCB Outline TL4K1152 | Production Kit Partnumber Content TL4K1152 HDMI Board TLCK-B 1. TLCK-FL10-150 10 pin flying leads cable for power and control(RS232/TTL), length 15cm 2. TLCK-K30-200 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm, Type 1:n TL4K1152-EXT | Evaluation Extension Partnumber Content EK-PA1100 Power supply and control interface board PS-TE10A12 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. TL-EVK-USB2-A-MICROB USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector TL-EVK-BRA Bracket and screws TL-EVK-HDMI High Speed HDMI Cable. HDMI-A male > HDMI-A male 4K 2 meter
Product number: TL4K1152-PK

Price on request

TL4K1161 | Dual Link 3 Gbps UHD-SDI
TL4K1161 | Dual Link 3 Gbps UHD-SDI
Kit: Production Kit (Board incl. Cable) | Block Cameras: No Block Camera
The TL4K1161 is a small form factor serial digital video (SDI) transmitter from AIVION. Camera video input signals are equalized, processed and output over coaxial connectors. Dual Link 3G-SDI output is compliant to SMPTE ST425-3, 2si mapping, FHD output is compliant to SMPTE ST425-1 level A standards. Camera control is accomplished by a transparent full duplex communication channel. Physical interface between camera and camera controller / PC is based on RS232 or 3.3V TTL level. TLCK-B-0200 cable kit is available as accessory. Features: SDI Video Output MCX 75 Ohm straight coaxial connectors Resolution up to 3840x2160p @ 30fps Dual Link 3G-SDI output of UHD formats 3G-SDI output of FHD formats 1.5G-SDI output of HD formats Automatic format detection Small Form Factor Small form factor 60mm x 46mm Camera Control RS232 level serial camera control interface 3.3V TTL level serial camera control IF Temperature Range and Power Ambient temperature (min/max): -5°C/+60°C Operating humidity range 20% to 80% Supply voltage 9V to 12V DC regulated Compliance RoHS compliant (2002/05/EG and 2011/65/EU) UL/UR compliant Application 4K UHD and full HD integrated cameras based on Sony FCB-ER8550, FCB-ER8530, FCB-ER8300, FCB-ES8230 and FCB-EW9500H camera blocks Industrial, medical, security, law enforcement, video production Download TL4K1161 V2.1.0 Datasheet TL4K1161 Block Diagram Power Input: 9V to 12V DC regulated supply input voltage range Characteristics: PD = 6.72W typ. (FCB-ER8300 lens steady +TL4K1161) P TL4K1161 = 3.72W (typ.) (12V DC supply, 3840x2160@25fps, TA = 25°C, Humidity = 40%) Operating and Storage Conditions: Operating Conditions: Ambient temperature (min/max): -5°C/+60°C = 23°F/140°F - Humidity: 20%-80% TL4K1161 PCB Connectors J7 SDI output connector Link 1 of DL-3G SDI output or 3G/1.5G-SDI FHD/HD output J8 SDI output connector Link 2 of DL-3G SDI output or 3G/1.5G-SDI FHD/HD output J1 Power and Control IF Pin Signal 1 DC Supply voltage input 2 DC Supply voltage input 3 GND (0V) 4 GND (0V) 5 Reset- Pull pin 5 to GND(0V) for 1ms or longer for reset, leave open for normal operation. 6 GND (0V) 7 TXD_TTL (serial IF transmit 3.3V, optional) 8 RXD_TTL (serial IF receive 3.3V, optional) 9 RXD_232 (serial IF receive RS232 level) 10 TXD_232 (serial IF transmit RS232 level) J4 HDMI Video In 30wire microcoax connector for 4K Block Cameras. Use 30wire micro coaxial cable supplied with cable kit. TL4K1161 PCB Outline TL4K1161 | Production Kit Partnumber Content TL4K1161 Dual Link 3G-SDI Board TLCK-B 1. TLCK-FL10-150 10 pin flying leads cable for power and control(RS232/TTL), length 15cm 2. TLCK-K30-200 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm, Type 1:n TL4K1161-EXT | Evaluation Extension Partnumber Content EK-PA1100 Power supply and control interface board PS-TE10A12 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. TL-EVK-USB2-A-MICROB USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector TL-EVK-BRA Bracket and screws 2 x CK-MCX-BNC 2 MCX to BNC connector cable 
Product number: TL4K1161-PK

Price on request

TL4K1261 | Dual Link 3 Gbps UHD-SDI (PCOC Feature)
TL4K1261 | Dual Link 3 Gbps UHD-SDI (PCOC Feature)
Kit: Production Kit (Board incl. Cable) | Block Cameras: No Block Camera
The TL4K1261 is a small form factor serial digital video (SDI) transmitter from AIVION with Power and Control over Coaxial Cable. Camera video input signals are equalized, processed, and output over straight DIN7A(10.23) connectors. Dual Link 3G-SDI output compliant to SMPTE ST425-3, 2si mapping, FHD output compliant o SMPTE ST425-1 level A Camera control is accomplished by a transparent full-duplex communication channel. The physical interface between camera and camera controller / PC is based on RS232 or 3.3V TTL level. TLCK-B cable kit is included and contains a 30wire micro coaxial cable for connecting TL4K1261 to FCB-ER8300 as well as a 10wire power supply and serial control cable harness. Features: SDI Video Output DIN7A (10.23) 75 Ohm straight coaxial connectors Resolution up to 3840x2160p @ 30fps Dual Link 3 Gbps UHD-SDI Transmitter Dual Out 3/1.5 Gbps FHD-SDI Transmitter 3G-SDI output of FHD formats 1.5G-SDI output of HD formats Automatic format detection PCOC Power and Control over Coaxial Cable 100m Camera Control RS232 level serial camera control interface 3.3V TTL level serial camera control IF Temperature Range and Power Ambient temperature (min/max): -5°C/+60°C Operating humidity range 20% to 80% Supply voltage 9V to 12V DC regulated Compliance RoHS compliant (2002/05/EG and 2011/65/EU) UL/UR compliant Application 4K UHD and full HD integrated cameras based on Sony FCB-ER8550, FCB-ER8530 and FCB-ER8300 4K camera blocks Industrial, medical, security, law enforcement, video production Download TL4K1161 V1.1.0 Datasheet TL4K1261 Block Diagram Power Input: 9V to 12V DC regulated supply input voltage range Characteristics: PD = 6.72W typ. (FCB-ER8300 lens steady +TL4K1261) P TL4K1261 = 3.62W (typ.) (12V DC supply, 3840x2160@29.97fps, TA = 25°C, Humidity = 40%) Operating and Storage Conditions: Operating Conditions: Ambient temperature (min/max): -5°C/+60°C = 23°F/140°F - Humidity: 20%-80% TL4K1261 PCB Connectors J7 SDI output connector Link 1 of DL-3G SDI output or 3G/1.5G-SDI FHD/HD output J8 SDI output connector Link 2 of DL-3G SDI output or 3G/1.5G-SDI FHD/HD output J1 Power and Control IF Pin Signal 1 DC Supply voltage input 2 DC Supply voltage input 3 GND (0V) 4 GND (0V) 5 Reset- Pull pin 5 to GND(0V) for 1ms or longer for reset, leave open for normal operation. 6 GND (0V) 7 TXD_TTL (serial IF transmit 3.3V, optional) 8 RXD_TTL (serial IF receive 3.3V, optional) 9 RXD_232 (serial IF receive RS232 level) 10 TXD_232 (serial IF transmit RS232 level) J4 LVDS Video In 30wire microcoax connector for 4K Block Cameras. Use 30wire micro coaxial cable supplied with cable kit. TL4K1261 PCB Outline TL4K1261 | Production Kit Partnumber Content TL4K1261 Dual Link 3G-SDI Board TLCK-B 1. TLCK-FL10-150 10 pin flying leads cable for power and control(RS232/TTL), length 15cm 2. TLCK-K30-200 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm, Type 1:n TL4K1261-EXT | Evaluation Extension Partnumber Content EK-PA1100 Power supply and control interface board PS-TE10A12 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. TL-EVK-USB2-A-MICROB USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector TL-EVK-BRA Bracket and screws 2 x TL-EVK-DIN-BNC-1 2 Connector cables with a 75Ω BNC Straight Plug and a 75Ω DIN Straight Plug. Certified for 3Gbps. Length 1 meter 
Product number: TL4K1261-PK

Price on request

TL4K1171 | 6 Gbps UHD-SDI & 3 Gbps Dual Link UHD-SDI Interface
TL4K1171 | 6 Gbps UHD-SDI & 3 Gbps Dual Link UHD-SDI Interface
Kit: Production Kit (Board incl. Cable) | Block Cameras: No Block Camera
The TL4K1171 is a small form factor serial digital video (SDI) transmitter from AIVION. Camera video input signals are equalized, processed, and output over coaxial connectors. 6G-SDI output is compliant to SMPTE ST2081-10 MODE 1 mapping, Dual Link 3G-SDI output is compliant to SMPTE ST425-3, 2si mapping and 3G-SDI FHD output is compliant to SMPTE ST425-1 level A standards. Camera control is accomplished by a transparent full duplex communication channel. Physical interface between camera and camera controller / PC is based on RS232 or 3.3V TTL level. TLCK-B cable kit is available as accessory. Features: SDI Video Output Native signal processing for highest image quality MCX 75 Ohm straight coaxial connectors Resolution up to 3840x2160p @ 30fps 6G-SDI output of UHD formats Dual Link 3G-SDI output of UHD formats 3G-SDI output of FHD formats Automatic format detection Small Form Factor Small form factor 60mm x 46mm Camera Control RS232 level serial camera control interface 3.3V TTL level serial camera control interface Temperature Range and Power Ambient temperature (min/max): -5°C/+60°C Operating humidity range 20% to 80% Supply voltage 9V to 12V DC Compliance RoHS compliant (2002/05/EG and 2011/65/EU) UL/UR compliant Application 4K UHD and full HD integrated cameras based on Sony FCB-ER8550, FCB-ER8530, FCB-ER8300, FCB-ES8230 and FCB-EW9500H camera blocks Industrial, medical, security, law enforcement, video production Download TL4K1171 V1.0.1 Datasheet TL4K1171 Block Diagram Power Input: 9V to 12V DC (12.5V DC max.) regulated supply input voltage range Characteristics: PD = 7.0W typ. (FCB-ER8530 lens steady +TL4K1171) P TL4K1171 = 3.9W (typ.) (12V DC supply, 3840x2160@29.97fps, TA = 25°C, Humididty = 40%) Operating and Storage Conditions: Operating Conditions: Ambient temperature (min/max): -5°C/+60°C = 23°F/140°F - Humidity: 20%-80% TL4K1171 PCB Connectors J1 Power and Control IF (JST SM10B-SRSS-TB) Pin Signal 1 DC Supply voltage input 2 DC Supply voltage input 3 GND (0V) 4 GND (0V) 5 Reset- Pull pin 5 to GND(0V) for 1ms or longer for reset, leave open for normal operation. 6 GND (0V) 7 TXD_TTL (serial IF transmit 3.3V, optional) 8 RXD_TTL (serial IF receive 3.3V, optional) 9 RXD_232 (serial IF receive RS232 level) 10 TXD_232 (serial IF transmit RS232 level) J3 External Sync (JST SM08B-SRSS-TB) for use with FCB-ER8550 only Pin Signal 1 GND (0V) 2 External Sync Loop Out 3 GND (0V) 4 ACC_LED (Output signal from FCB-ER8550) 5 GND (0V) 6 External Sync Input 7 GND (0V) 8 SYNC_LOCK (Output signal from FCB-ER8550) J4 HDMI Input (KEL USL00-30L-A) 30wire microcoax connector for FCB-ER8xxx and FCB-EW9500H. Use 30wire micro coaxial cable supplied with cable kit. J6 Board feature extension connector Contact us for further notice J7 + J8 SDI output connector (Samtec MCX7-J-P-H-ST-TH1) Mode J7 J8 UHD 6GbpsUHD mode selection by switch#2 No output 6G-SDI UHD 3GbpsUHD mode selection by switch#2 Link1 of Dual Link 3G-SDI Link2 of Dual Link 3G-SDI FHDFHD operation requires camera to be set to 1080p60, 1080p59.94 or 1080p50 GND (0V) 3G-SDI (same signal as J7) Board Config Switch   Switch# OFF ON 1 RS232 based camera control 3.3V TTL based camera control 2 6G-SDI UHD Output Mode DL 3G-SDI UHD Output Mode 3 Keep OFF Reserved 4 Keep OFF Reserved TL4K1171 PCB Outline TL4K1171 | Production Kit Partnumber Content TL4K1171 6 Gbps / Dual Link 3Gbps UHD-SDI Interface Board TLCK-B 1. TLCK-FL10-150 10 pin flying leads cable for power and control(RS232/TTL), length 15cm 2. TLCK-K30-200 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm, Type 1:n TL4K1171-EXT | Evaluation Extension Partnumber Content EK-PA1100 Power supply and control interface board PS-TE10A12 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. TL-EVK-USB2-A-MICROB USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector PTL-EVK-BRA Bracket and screws 2 x CK-MCX-BNC MCX to BNC connector cable
Product number: TL4K1171-PK

Price on request