Event & Theater

Camera and Converter Solutions optimized for the Event & Theater needs

Block Cameras for Events and Theater

AIVION AZM-FS10L
Full-HD 10X optical zoom moduleFeaturesEffective numbers of Pixels: Approx. 2,100,000 pixelsImage sensor: 1/2.8 inch Sony Starvis CMOS Sensor (Progressive Scan)Lens: Optical 10x, f = 4.7 mm to 47.0 mm (F 1.6 to F 3.0)Horizontal viewing angle (wide to tele): 57.7 degrees(WIDE), 6.4 degrees(TELE)Digital Zoom: 12xVideo Output Digital: LVDS Digital ITU-R BT.1120 - YcbCr4:2:2 16bitsVideo Output Analog: SD CVBS (NTSC/PAL), 1.0Vp-p 75, CompositeCamera Control Interface: Visca Protocol

Price on request

AIVION AZM-FS30L
Full-HD 30x Optical Zoom ModuleFeaturesEffective numbers of Pixels: Approx. 2,100,000 pixelsImage sensor: 1/2.8 inch Sony Starvis CMOS Sensor (Progressive Scan)Lens: Optical 30x, f = 4.7 mm to 141 mm (F 1.5 to F 4.0)Horizontal viewing angle (wide to tele): 60.5 degrees(WIDE) to 2.3 degrees(TELE)Digital Zoom: 12xVideo Output Digital: LVDS Digital ITU-R BT.1120 - YcbCr4:2:2 16bitsVideo Output Analog: SD CVBS (NTSC/PAL), 1.0Vp-p 75, CompositeCamera Control Interface: Visca Protocol

Price on request

Sony FCB-EV7520A
Back-illuminated CMOS sensor1/2.8-type Exmor RTM CMOS image sensor provides full high-definition and high-quality images. Fine, high- quality images can be captured even at night or in dark places.High-performance 30x lensThe camera is equipped with a bright lens with 30× optical zoom and F1.6 aperture.Highly advanced ISPUsing the image signal processor (ISP), the following images can be obtained.Full HD 60 fps output imageLow focal plane distortion image using the highspeed readout of imagerSpot Light Avoidance

Price on request

Interface Solutions for Events and Theater 

TL7075-TL7076 | one fiber line solution for camera control and video, transmit
TL7076+ Optical receiver compliant to SMPTE297M-2006 serial optical 3G/HD video standard + Automatic video standard detection+ Input signal jitter removal+ SFP transceiver λTX=1550nm, SMF/LC included+ Reclocked 3G/HD-SDI BNC + MCX coax outputs, format conversion for DVI(HDMI) RGB output + Dual serial control interface (RS232 or 3.3V TTL)+ Supply voltage: 7V to 12V DC regulatedTL7075+ Supports all Sony FCB-EV, all FCB-EH and FCB-SE600 camera models + Digital LVDS video input from camera+ Optical 3G/HD-SDI output compliant to SMPTE297M-2006+ SFP transceiver λTX=1310nm, SMF/LC included+ Local BNC coax, MCX coax and DVI (HDMI connector) 3G/HD-SDI outputs

Price on request

TL8656 | HD-SDI Interface with Trigger and PCOC
The AIVION TL8656 outputs serial digital video (SDI) up to 1080p60 with Power and Control over Coaxial Cable and an external Trigger. It connects to the digital video interface of the block cameras and supports several progressive and interlace HDTV formats. Features: One 3G-SDI/HD-SDI Output Right angle DIN7A connector 3G-SDI output compliant to SMPTE 424M level A HD-SDI output compliant to SMPTE 292M 1080p60 /59.94 /50 /30 /29.97 /25 Hz 1080i60 /59.94 /50 Hz 720p60 /59.94 /50 /30 /29.97 /25Hz Board Side Mount The TL8656 video interface board can be mounted directly to the side of the camera module and the interface board form factor is optimal adjusted to the dimensions of the Tamron cameras. Tamron MP1010M-VC Tamron MP1110M-VC Camera Control RS232 and TTL level serial control interface Power and Control over Coaxial Cable Ext. Trigger Temperature Range and Power Operating ambient temperature range -5°C/+60°C Operating humidity range 20% to 80% Supply voltage 9.5V to 12V DC regulated Small form factor & Compliance Small form factor 60mm x 36mm RoHS compliant (2002/05/EG and 2011/65/EU) UL/UR compliant Applications Industrial, medical, security, inspection, ROV and Security Download TL8656 Datasheet TL8656 Block Diagram Power Input: 9.5V to 12V DC regulated supply input voltage range Power consumption (MP1110M-VC + TL8656) 4.7W (cam motors inactive) Power consumption value conditions: Power 12V DC, video mode 1080p60 Ambient temperature +25°C/77°F Humidity 30% Operating and Storage Conditions: Operating Conditions: Ambient temperature (min/max): -5°C/+60°C = 23°F/140°F Humidity: 20%-80% Storage Conditions: ATemperature (min/max): -20°C/+60°C = -4°F/140°F Humidity: 20%-80% TL8656 PCB Connectors J2 KEL USL00-30L-A Camera IF, use supplied 30wire micro coaxial cable only J4 3G/HD-SDI output KEL USL00-30L-A Default type: CEI C-SX113 (DIN7A / 1.0/2.3 coax system) J3 Power and Control JST SM10B-SRSS-TB Pin Signal 1 DC In 2 DC In 3 GND 4 GND 5 Reset / Shut Down, pull to GND to reset/shut down TL7650 and camera for reset, pull to GND for one second or longer 6 GND 7 TXD_TTL (serial IF transmit, 3.3V) and/or temperature alert output 8 RXD_TTL (serial IF receive, 3.3V) 9 RXD_232 (serial IF receive, RS232 level) 10 TXD_232 (serial IF transmit, RS232 level) J5 CVBS Output JST SM03B-SRSS-TB Pin Signal 1 GND 2 CVBS analog video output 3 GND (0V) CVBS analog video output is available with Tamron MP1110M-VC only. In this case the camera monitoring mode (register 72) must be set to NTSC or PAL video. Refer to Tamron MP1110M-VC technical manual for further details. In NTSC or PAL mode, there will be no SDI output signal available from TL8656. CVBS output connector J5 is available on Rev.B boards from September 26, 2018. TL8656 PCB Outline TL8656 | Production Kit Partnumber Content TL8656 3G/HD-SDI Board TLCK-B 1. TLCK-FL10-150 10 pin flying leads cable for power and control(RS232/TTL), length 15cm 2. TLCK-K30-200 30 pin KEL USL type micro coaxial cable, connector on both sides, length 20cm TL8656-EXT | Evaluation Extension Partnumber Content EK-PA1100 Power supply and control interface board PS-TE10A12 12 V AC to DC external power supply with interchangeable blade kit for USA, Europe, United Kingdom and Australian. TL-EVK-USB2-A-MICROB USB 2.0 Cable with a USB 2.0-A male and a USB 2.0 micro-B male connector TL-EVK-DIN-BNC-1 Connector cable with a 75Ω BNC Straight Plug and a 75Ω DIN Straight Plug. Certified for 3Gbps. Length 1 meter

Price on request